TECH2支持1992年和更新款的通用型汽车。每个通用子品牌所使用的诊断软件都是单独提供的。通用是GM和世界上有与其相关经销权汽车的扫描工具（比如：铃木，五十铃，HOLDENS，萨博，AM通用以及欧宝和沃克斯豪尔）。
性能：
•可靠的GM软件，为所有GM汽车提供最完整的诊断软件。
•支持所有1992年后GM系统的OBD协议。
•能捕捉到存贮的诊断故障编码（DTCs）和冻结帧的数据。
•在汽车运行时可以查看其诊断状态。
•在执行动力系，底盘和车身诊断时，有完整的双向控制功能。
•对1993年和更新款GM汽车闪存编程的ECU具有强大的编程功能。
•便利的背光式屏幕。
参数规格：
•尺寸：12" x 6" x 2"
•微处理器：32 bit, 16 MHz
•内存：32 MB flash type II PCMCIA.为未来的扩展提供TYPE III插槽。
•通讯：内置RS232通讯端口。
•屏幕：3.8" x 2.8"有着完整图像容量的背光式单色画：320 x 240像素。可以即刻显示高达9辆车的参数。
TECH2有三个主要软件功能:
*诊断
1、动力系
2、底盘
3、车身
*编程服务（ECU再编程）
1、对存在的ECU再编程
2、替换并编程新ECU
*查看采集到的数据
1、冻结帧
2、失败的记录
包装：
* TECH 2
* 16 Pin适配器
* NAO 12/19适配器
* 12V Cigarrette电源线
* 110V AC/DC电源
* DLC回路线
* RS232 DB9适配器
* RS232线
* RS232回路
*机箱
The TECH-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix TECH2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the TECH 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan toolobsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix TECH-2 Specifications
Dimensions
12" X 6" X 2"
Microprocessor
32 bit, 16 MHz
Memory
32 MB flash type II PCMCIA. Type III slot available for future expansion.
Communications
Integral RS232 communication port.
Screen
3.8" X 2.8" backlit monochrome with full graphics capability: 320 X 240 pixels. Displays up to 9 vehicle parameters at once
GM TECH-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
TECH-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download ( 199.2 kb )
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/Security features
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the TECH2 Flash and a CAN diagnostic interface module. The module connects between the TECH2 Flash's diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
